Git initial commit

templates/etc/fail2ban/filter.d/nginx-nohome.local.j2

@@ -0,0 +1,5 @@
+[Definition]
+
+failregex = ^<HOST> -.*GET .*/~.*
+
+ignoreregex =

templates/etc/fail2ban/filter.d/nginx-noproxy.local.j2

@@ -0,0 +1,5 @@
+[Definition]
+
+failregex = ^<HOST> -.*GET http.*
+
+ignoreregex =

templates/etc/fail2ban/filter.d/nginx-noscript.local.j2

@@ -0,0 +1,5 @@
+[Definition]
+
+failregex = ^<HOST> -.*GET.*(\.asp|\.exe|\.pl|\.cgi|\.scgi)
+
+ignoreregex =

templates/etc/fail2ban/jail.local.j2

@@ -0,0 +1,34 @@
+[DEFAULT]
+bantime  = {{ fail2ban_bantime }}
+findtime = {{ fail2ban_bantime }}
+maxretry = {{ fail2ban_maxretry }}
+
+[sshd]
+enabled  = true
+port     = 22,{{ ssh_port }},ssh
+
+[nginx-http-auth]
+enabled  = {{ 'nginx' in fail2ban_activate_modules }}
+port     = http,https
+filter   = nginx-noscript
+logpath  = %(nginx_error_log)s
+maxretry = 6
+
+{% for filter in fail2ban_nginx_default_filter %}
+[{{ filter }}]
+enabled  = {{ 'nginx' in fail2ban_activate_modules }}
+port     = http,https
+filter   = {{ filter }}
+logpath  = %(nginx_access_log)s
+maxretry = 2
+
+{% endfor %}
+{% for filter in fail2ban_nginx_selfmade_filter %}
+[{{ filter }}]
+enabled  = {{ 'nginx' in fail2ban_activate_modules }}
+port     = http,https
+filter   = {{ filter }}
+logpath  = %(nginx_access_log)s
+maxretry = 2
+
+{% endfor %}

templates/etc/ssh/sshd_config.j2

@@ -0,0 +1,121 @@
+#	$OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+Protocol {{ ssh_protocol_version }}
+Port {{ ssh_port }}
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 10m
+PermitRootLogin {{ ssh_login_root }}
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+PubkeyAuthentication {{ ssh_use_key }}
+
+# Expect .ssh/authorized_keys2 to be disregarded by default in future.
+#AuthorizedKeysFile	.ssh/authorized_keys .ssh/authorized_keys2
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+PasswordAuthentication {{ ssh_use_password }}
+PermitEmptyPasswords no
+
+# Change to yes to enable challenge-response passwords (beware issues with
+# some PAM modules and threads)
+ChallengeResponseAuthentication no
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+#GSSAPIKeyExchange no
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+PrintMotd no
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# Allow client to pass locale environment variables
+AcceptEnv LANG LC_*
+
+# override default of no subsystems
+Subsystem	sftp	/usr/lib/openssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server

templates/etc/wireguard/private.key.j2

@@ -0,0 +1 @@
+{% if not wireguard_is_gateway %}{{ wireguard_clients[wireguard_client_host].private_key }}{% else %}{{ wireguard_gateway_private_key }}{% endif %}

templates/etc/wireguard/public.key.j2

@@ -0,0 +1 @@
+{% if not wireguard_is_gateway %}{{ wireguard_clients[wireguard_client_host].public_key }}{% else %}{{ wireguard_gateway_public_key }}{% endif %}

templates/etc/wireguard/wireguard-client.conf.j2

@@ -0,0 +1,11 @@
+[Interface]
+Address = {{ wireguard_gateway_net_prefix }}.{{ wireguard_clients[wireguard_client_host].index }}/32
+PrivateKey = {{ wireguard_clients[wireguard_client_host].private_key }}
+DNS = {{ cloud_internal_dns }}
+
+[Peer]
+PublicKey = {{ wireguard_gateway_public_key }}
+Endpoint = {{ wireguard_gateway_host }}:{{ wireguard_gateway_port }}
+AllowedIPs = {{ wireguard_gateway_net_prefix }}.1/{% if wireguard_allow_adjacent_client_traffic %}{{ wireguard_gateway_net_cidr }}{% else %}32{% endif %}
+
+PersistentKeepalive = {{ wireguard_keepalive }}

templates/etc/wireguard/wireguard-server.conf.j2

@@ -0,0 +1,25 @@
+[Interface]
+Address = {{ wireguard_gateway_net_prefix }}.1/{{ wireguard_gateway_net_cidr }}
+ListenPort = {{ wireguard_gateway_port }}
+PrivateKey = {{ wireguard_gateway_private_key }}
+
+{% if wireguard_gateway_forward is defined and wireguard_gateway_forward | length > 0 %}
+PreUp = sysctl -w net.ipv4.ip_forward=1
+PreUp = sysctl -w net.ipv6.conf.all.forwarding=1
+
+{% for config in wireguard_gateway_forward %}
+PreUp = iptables -t nat -A PREROUTING -i {{ wireguard_gateway_interface }} -p tcp --dport {{ config.server_port }} -j DNAT --to-destination {{ wireguard_gateway_net_prefix }}.{{ config.client_index }}:{{ config.client_port }}
+PostDown = iptables -t nat -D PREROUTING -i {{ wireguard_gateway_interface }} -p tcp --dport {{ config.server_port }} -j DNAT --to-destination {{ wireguard_gateway_net_prefix }}.{{ config.client_index }}:{{ config.client_port }}
+
+{% endfor %}
+PreUp = iptables -t nat -A POSTROUTING -o {{ cloud_name }} -j MASQUERADE
+PostDown = iptables -t nat -D POSTROUTING -o {{ cloud_name }} -j MASQUERADE
+{% endif %}
+
+{% for client in wireguard_clients %}
+## Wireguard {{ cloud_name }} - {{ client }} ##
+[Peer]
+PublicKey = {{ wireguard_clients[client].public_key }}
+AllowedIPs = {{ wireguard_gateway_net_prefix }}.{{ wireguard_clients[client].index }}/32
+
+{% endfor %}